Features:
Genuine, reliable Siemens Injectors
Excellent response characteristics
Robust Design
High Impedance
Low Impedance performance characteristics with High Impedance Compatibility

Siemens Deka 875cc Injectors Specifications:

• Coil Resistance: 12.0 Ohms / High Impedance / High-Z (No ECM driver modifications required).
• Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 80 lb/hr = 875 cc/min
• Gain: 0.11ms/mg.
• Offset: 0.65ms.
• Minium linear PW: 1.9ms.
• Turn on time: 1.3ms.
• Turn off time: 0.7ms @
• O-rings: 14mm.
• O-ring center distance: 60.44mm.
• Connector: Bosch EV1.
• Series: DEKA 4 ( DEKA IV ).
• Orifice Type: Multi-orifice.
• Spray Pattern: 30 Degree Spray Cone.
• Factory fitted with Viton upper and lower o-rings.

Equivalent Part Numbers:
Siemens FI114992
Siemens 110324

The post Siemens Deka 875cc Injectors 80lb/h FI114992 110324 EV1 appeared first on ALU Performance.

Features:
Genuine, reliable Siemens Injectors
Excellent response characteristics
Robust Design
High Impedance
Low Impedance performance characteristics with High Impedance Compatibility

Siemens Deka 630cc Injectors Specifications:

– Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM  driver modifications required)
– Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 60 lb/hr = 630 cc/min  = 453 g/min
– Static Flow Rate @ 87PSI ( 600kPa ) w/Gas: 85.7 lb/hr = 900 cc/min  = 648 g/min
– Gain: 0.11ms/mg
– Offset: 0.055ms
– Turn on time @ 14VDC: 1.14ms
– Turn off time: 0.85ms @ 600KPa
– Connector: Bosch EV1
– Orifice Type: Multi-orifice
– Spray Pattern: 30 Degree Spray Cone
– Factory fitted with Viton upper and lower o-rings
– 74,7mm end to end
– 64mm o-ring to o-ring

Equivalent Part Numbers:
Siemens FI114961 , 107-961 ( 107961 ) & # 39-041

The # 39-041 is the updated part number that supersedes the original Siemens Deka 114961, featuring the same reliable fit and performance characteristics.

The post Siemens Deka 630cc Injectors 60lb/h 107961 Fi114961 39-041 EV1 appeared first on ALU Performance.

The Green Giant 440cc injectors are commonly used with self assembled big turbo kits. Customers have had success combining these injectors with VR6 MAF housings, with stock or standard chipped programming.

A direct drop in fuel injector for the standard fuel rail.

Technical details:

– Flow rate: 42lbs/hr, 450cc/min at 43.5 psi, 3 BAR
– Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
– Spray Pattern: Dual Spray Wide Cone / Split Cone
– Electrical Connector: EV1
– Fitted with Viton upper and lower o-rings.

The post Bosch Green Giant Injectors 440cc 0280155968 9202100 EV1 Audi VW appeared first on ALU Performance.

Bosch Number: 0 280 156 063 ( 0280156063 )
OE Number: 06A 906 031 BC , 0 280 156 064

Bosch 0280156063 Injectors fits for:

AUDI    A3 (8L1)    S3 quattro    ab 10/2001 bis 05/2003    1781 cm³    165 KW    224 PS

AUDI    A3 (8L1)    S3 quattro    ab 03/1999 bis 04/2002    1781 cm³    154 KW    210 PS

AUDI    TT (8N3)    1.8 T quattro    ab 03/2005 bis 06/2006    1781 cm³    176 KW    240 PS

SEAT    LEON (1M1)    1.8 T Cupra R    ab 02/2002 bis 06/2006    1781 cm³    154 KW    209 PS

SEAT    LEON (1M1)    1.8 T Cupra R    ab 07/2003 bis 06/2006    1781 cm³    165 KW    225 PS

SEAT    LEON (1M1)    1.8 Turbo 4×4    ab 05/2002 bis 05/2003    1781 cm³    154 KW    209 PS

The post Bosch 0280156063 Injectors for Audi / VW/ Seat 1.8 Turbo appeared first on ALU Performance.